- A+
Brother DCP 7055 Printer Toner Resetting Tips
Brother DCP 7055 is a popular laser printer that is widely used in homes and offices. The printer is affordable and easy to use. However, like any other laser printer, it requires regular toner replacements, which can be expensive. However, there is a way to reset the toner and extend its life span. Here are the tips for resetting the toner of Brother DCP 7055 printer.
Step 1: Open the Front Cover
The first step is to open the front cover of the printer. You can do this by pressing the release button on the left-hand side of the printer. Once you have opened the front cover, you will see the toner cartridge inside the printer.
Step 2: Press the Go button
After opening the front cover, you need to press the Go button on the printer for a few seconds. The Go button is located on the printer's control panel, and it's usually green. Hold the button until you see the green LED light up. When the LED lights up, release the Go button.
Step 3: Close the Front Cover
Now, close the front cover of the printer. Make sure it is properly closed and locked in place.
Step 4: Press the Go Button Two Times
Press the Go button two times quickly, and you will see the toner light blink. This indicates that the toner has been reset.
Step 5: Reset the Drum Unit
Though you have reset the toner, you may also need to reset the drum unit to achieve optimal printer performance. You can do this by opening the front cover and pressing the Go button for 4 seconds. After releasing the Go button, close the front cover.
Conclusion
Resetting your Brother DCP 7055 printer toner will save you money on toner replacements and extend your printer's lifespan. Follow the above steps carefully, and you will have your toner and drum unit reset in no time.
