- A+
Brother Printer 1900DW Factory Reset Method
Brother Printer 1900DW Factory Reset is a necessary process when your printer has some issues, or you want to clear all the settings and start fresh. The process is straightforward, and it doesn’t require any technical skills. Here are the steps you need to follow:
Step 1: Turn off the Printer
The first step is to turn off the printer by pressing the power button until it shuts down completely. Make sure that the power cord is still connected to the printer and the power outlet.
Step 2: Press the GO Button
While the printer is still off, press and hold the GO button located on the top panel of the printer. Keep holding the GO button for at least 20 seconds.
Step 3: Release the GO Button
After 20 seconds, release the GO button. The printer will start to initialize, and all the lights will flash once, indicating that the reset process has started.
Step 4: Wait for the Reset Process to Complete
You need to wait until the reset process is complete. It may take a few minutes, so be patient, and don’t interrupt the process by pressing any buttons or unplugging the power cord.
Step 5: The Printer Will Restart
Once the reset process is complete, the printer will restart automatically. You will notice that all the settings have been cleared, and the printer is back to its default state.
Conclusion
The Brother Printer 1900DW Factory Reset is a simple process that can solve most of the printer issues. If you’re experiencing any problems with your printer, try to reset it to see if it resolves the issue. If you’re still having problems afterward, you may need to contact the manufacturer for further assistance.
