- A+
Brother 7470d printer resets toner after adding new toner
Brother 7470d printer is a great printing device that offers high-quality printing services. However, at times, the printer may tend to act up, and one of the common problems that many people experience is the toner error message, which shows that the printer is low on toner. In such cases, it becomes essential to reset the toner, and in this article, we will show you how to reset the toner after adding new toner.
Step 1: Turn Off the Printer
The first step is to ensure that you turn off the printer before you begin the resetting process. You should also disconnect the printer from the power source to ensure that there are no electrical accidents during the process.
Step 2: Locate the Toner Cartridge
The second step is to locate the toner cartridge. On the Brother 7470d printer, the toner cartridge is usually located at the back of the printer. You should carefully remove the toner cartridge from the printer to prevent any spillage or damage to the printer.
Step 3: Reset the Toner
The next step is to reset the toner. There are usually two ways to reset the toner on Brother 7470d printer. One method involves a manual reset, while the other method involves using a reset gear. We will discuss both methods below.
Method 1: Manual Reset
To perform a manual reset, follow the steps below:
1. Locate the reset switch on the toner cartridge.
2. Hold the reset switch down for about five seconds.
3. Release the reset switch.
4. Reinstall the toner cartridge into the printer.
The manual reset method is straightforward and easy to perform. However, it may not work on some Brother 7470d printers.
Method 2: Reset Gear
The reset gear method is more complicated than the manual reset method, but it is more reliable. Here are the steps you should follow:
1. Locate the reset gear on the toner cartridge.
2. Use a flat-head screwdriver to remove the reset gear.
3. Turn the reset gear counter-clockwise until it stops.
4. Reinstall the reset gear into the toner cartridge.
5. Reinstall the toner cartridge into the printer.
By following these steps, you will have reset the toner on your Brother 7470d printer.
Step 4: Restart the Printer and Test
The final step is to restart the printer and test it to ensure that the resetting process was successful. Once you have tested the printer, you can resume your printing duties without any toner-related issues.
Conclusion
Resetting the toner on Brother 7470d printer can be a simple task if you follow the right steps. By resetting the toner, you will be able to continue using your printer without any interruptions caused by toner errors. Additionally, it is important to ensure that you use high-quality toner cartridges to prevent frequent toner errors.
