- A+
Introduction
Canon inkjet printers are widely used in both homes and offices. However, sometimes the printer may face some issues like a full waste ink tank, which requires it to be reset. Resetting the printer is also called as "clearing the printer." This article will guide you through the steps of resetting your Canon inkjet printer.
Step 1: Identify the Printer Model
The first step in clearing the printer is to know the model number. The model number can be found on the printer's user manual, box, or the printer itself. This step is crucial because the resetting process may differ based on the printer model you have. Once you identify the printer model, you can proceed with the steps for your printer model.
Step 2: Switch Off the Printer
Before resetting the printer, ensure to turn off the printer. Press the power button and hold it until the printer turns off completely. Wait for a few seconds before proceeding to the next step. This step will help you to reset the printer to its default settings.
Step 3: Press and Hold the Resume Button
Next, press and hold the resume button for at least ten seconds. The resume button for Canon inkjet printers is usually marked with a triangle inside a circle. This button is usually located on the top or the front panel of the printer. Holding down this button will reset the printer.
Step 4: Release the Resume Button
After holding down the resume button for ten seconds, release the button. You will notice that the LED lights on the printer will start flashing. The flashing lights indicate that the printer is in the resetting mode. Release the button and wait patiently for the printer to complete resetting. This process may take a few minutes depending on your printer model.
Step 5: Power On the Printer
After the resetting is complete, turn on the printer. Once you power on the printer, the printer settings will be reset to its default settings, and the printer will be ready for use.
Conclusion
Resetting your Canon inkjet printer can help you to resolve various issues like the full waste ink tank. The process is simple, and you only need to follow the steps as per your printer model. Ensure to identify the printer model before proceeding with the steps and make sure to turn off the printer before resetting it. The resetting process may take a few minutes, but patience is key. Once the process is complete, the printer will be restored to its default settings.
