- A+
Introduction
Printing is an essential task in most workplaces. Printers are always in high demand, and they are used often. However, there may be times when you need to reset your printer. This can be due to various reasons, such as getting error messages or needing to clear the printer's memory. In this article, we will discuss how to clear the PagePro1590MF printer's memory and reset it to its default settings.
Step 1: Power off the printer
Before clearing the printer's memory, it is essential to power it off. Turn off the printer's power button. Unplug the printer's power cord from the wall outlet as well as from the printer's back. Wait for a few minutes so that any residual electricity can dissipate.
Step 2: Open the Printer Cover
Now, you need to open the printer cover. To do this, lift the scanner unit and wait for it to lock in place. Locate the green lock lever on the right side of the printer and move it to the unlock position. Then, lift the printer cover to its fully open position.
Step 3: Locate the Drum Unit
The drum unit of the PagePro1590MF printer may now be seen. Locate the drum unit assembly, which houses the printer's toner cartridge. The drum unit is in the center of the printer. Hold the green handle of the drum unit assembly and gently pull the drum unit out.
Step 4: Locate the Reset Button
Now that the drum unit has been removed, locate the reset button. The reset button is a small, blue and rectangular button located on the top of the printer's main control board. It is generally behind the drum unit.
Step 5: Press the Reset Button
Using something small and pointy, such as a pen or paperclip, press and hold the reset button for approximately ten seconds. Release the button once the printer's toner LED light begins flashing. This indicates that the reset has been done successfully.
Step 6: Reinstall the Drum Unit
After performing the reset, it is time to reinstall the drum unit. Hold the handle of the assembly and gently insert it back into the printer. Push it back in until it clicks into place. Close the printer cover and ensure that the green lever on the right side of the printer is in the locked position.
Step 7: Power the Printer On
Finally, it is time to turn the printer's power back on. Plug the power cord back into the printer and the wall outlet. Turn on the printer's power button and allow it to initialize. You have successfully cleared the PagePro1590MF printer's memory and reset it to its default settings.
Conclusion:
In conclusion, resetting your PagePro1590MF printer is an easy process. By following these simple steps, you can clear the printer's memory and return it to its default settings, which can help in troubleshooting any printing issues you may be experiencing. Remember to always turn off and unplug the printer before performing any maintenance on it.
