- A+
Introduction
Servicetool is a powerful tool used for resetting Canon printers. It is a software program that can reset the printer firmware and can also change the printer's internal settings. The tool is easy to use, and you can clear the printer's ink levels, waste ink counters, and other important printer settings. In this article, we will explain how to use servicetool to reset your Canon printer.
Step by Step Guide on Clearing Canon Printer's Ink Levels using Servicetool
Step 1: Download and Install Servicetool
You will need to download the servicetool software and install it on your computer. You can find the software online by doing a quick search on the internet. When you download the software, you will get a zip file that you need to extract to your computer. Once you have extracted the software, open the setup file, and follow the installation prompts.
Step 2: Put Your Canon Printer in Service Mode
You need to put your Canon printer in service mode before you can use servicetool. To put your printer in service mode, follow these steps:
Turn off your Canon printer.
Press and hold the Resume button (also known as the "Stop button") on your printer.
While holding the button, press and hold the power button on the printer. Keep both buttons pressed for a couple of seconds.
Release the power button but keep holding the Resume button. Press the power button again, and then release the Resume button.
Your printer should now be in service mode.
Step 3: Run Servicetool on Your Computer
Now, you will need to run servicetool on your computer. To do this, follow these steps:
Open the servicetool software on your computer.
You should see an option to select your printer model. Choose the model of your Canon printer from the list.
Click on the "Main" tab in the servicetool program.
Click on the "EEPROM clear" button, and then click on the "OK" button.
Your printer's ink levels should now be reset.
Step 4: Exit Service Mode on Your Printer
To exit service mode on your Canon printer, follow these steps:
Press and hold the power button on your printer to turn it off.
Turn on your printer again.
Conclusion
Servicetool is a powerful tool that can help you reset your Canon printer's ink levels and waste ink counters. This can be useful if you are having issues with your printer, or if you need to reset the printer for troubleshooting purposes. By following the step-by-step guide above, you should be able to use servicetool to clear your printer's ink levels and maintain the efficiency and longevity of your printer.
