- A+
Brother DCP1618 Printer Reset After Ink Refill
Brother DCP1618 is a popular printer model for home and office use. One common issue that users face is the printer showing low ink levels or not printing despite having recently refilled the ink cartridges. This is because the printer needs to be reset after an ink refill to recognize the new ink levels. In this article, we will provide a step-by-step guide on how to reset your Brother DCP1618 printer after ink refill.
Step 1: Identify Your Printer Model
Before proceeding with the reset process, make sure that you have the correct printer model – Brother DCP1618. If you have a different Brother printer model, the following instructions may not work or may cause permanent damage to your printer.
Step 2: Open the Printer Cover
To reset the printer, you need to access the ink cartridges. Start by opening the printer cover. If your printer is turned on, make sure to turn it off before opening the cover.
Step 3: Remove the Ink Cartridges
Once the cover is open, locate the ink cartridges and remove them from the printer. Be careful not to touch the electrical contacts on the cartridges as this may cause damage to the printer.
Step 4: Clean the Ink Cartridge Contacts
Before resetting the printer, it is recommended to clean the ink cartridge contacts. This will ensure that the printer recognizes the ink cartridges and their ink levels. Take a clean cloth and gently wipe the contacts on the ink cartridges.
Step 5: Reset the Printer
Now that the ink cartridges are removed and contacts are clean, it's time to reset the printer. There are different ways to reset a Brother DCP1618 printer depending on the model. One method is to press and hold down the "Menu" button on the printer's control panel. While holding down the button, turn on the printer. Release the "Menu" button once the "Maintenance" message appears on the screen. Use the arrow keys to select "Reset" and press the "OK" button.
Step 6: Replace the Ink Cartridges
After the printer is reset, insert the ink cartridges back into the printer. Make sure that the cartridges are properly installed and click into place. Close the printer cover.
Step 7: Test the Printer
Finally, turn on the Brother DCP1618 printer and print a test page to confirm that the printer is working correctly and recognizing the new ink levels.
In conclusion, resetting your Brother DCP1618 printer after ink refill is an easy process that can be done at home. By following the step-by-step guide provided in this article, you can ensure that your printer recognizes the new ink levels and prints accurately.
