- A+
Brother HL2140 Printer How to Reset Ink Levels to Zero
The Brother HL2140 printer is a monochrome laser printer that provides fast and reliable printing for home and small offices. Like most printers, it uses toner cartridges that need to be replaced when they run out of ink. However, some users may find it frustrating that even after they replace the cartridge, the printer still displays an error message indicating that the ink levels are low or empty. In this article, we will explain how to reset the ink levels to zero on your Brother HL2140 printer so that you can continue printing without any hindrance.
Step 1: Open the front cover of the printer
The first step is to open the front cover of the printer. You can do this by pressing the button on the front of the printer or by gently pulling the cover towards you. Once the cover is open, you can remove the drum and cartridge assembly from the printer.
Step 2: Press and hold down the “Go” button
Next, you need to press and hold down the “Go” button on the printer. The button is located on the top of the printer, near the front. As you press down the button, keep your eyes on the four LEDs that indicate the status of the printer. You will notice that all four LEDs will light up.
Step 3: Release the “Go” button
After a few seconds of holding down the “Go” button, you can release it. However, it is important to note that you should not release the button until you see all four LEDs light up. Once you release the button, you will notice that the toner, drum, and error LEDs will light up.
Step 4: Press the “Go” button twice
To complete the process, you need to press the “Go” button twice. The toner LED will turn off, and the drum and error LEDs will stay on. Press the “Go” button again, and all three LEDs will turn off, indicating that the ink levels have been reset to zero.
Step 5: Replace the drum and cartridge assembly
Now that you have reset the ink levels to zero, you can replace the drum and cartridge assembly back into the printer. Make sure they are properly seated before closing the front cover.
Conclusion:
Resetting the ink levels to zero on your Brother HL2140 printer is easy and straightforward once you know the steps. By following the steps outlined in this article, you can continue printing without any disruptions or error messages. However, it is important to keep in mind that resetting the ink levels does not mean that the cartridge has been refilled or replaced. It simply allows you to continue using the cartridge until it is truly empty.
